Cycloidal pinwheel reducer is usually a up-dated of new type transmissing machine designed with K-H-V less pearly whites engagement and the cycloidal pin steering wheel clenching mechanism, which are widely used in drive and reducing of textile and dying, foodstuff, mining and metallurgy, Essential oil and chemical conveyors, project machinery etc, Sector and cranes. various fields.
Features:
1. Gear is made from high durability low carbon alloy metal by carburizing and quenching. The hardness of tooth area can reach HRC58-62. CNC grinding technology is used for all gears, good call performance and with huge precision
2. high transmission productivity: single stage over 96.5%; double stage over 93%; three stage over 90%;
3. stable procedure and low noise;
4, compact structure, light weight, long service existence and high bearing capability;
5. convenient to assemble, check and disassemble.
Operation specifications and precautions
1.High modularization design: various equip with various motor or other power suggestions conveniently.Same machine type may equip with many power motor. It is easy to recognize the combination and
junction between every equipment type.
2.Transmission ratio: good division, wide scope. The combined machine type may form very large transmission ratio, i.e. output very low rotary speed.
3.Form of assembly: the positioning to be installed isn’t limited.
4.High strength, small: the box body is constructed of great strength cast iron. Gear and gear shaft adapts the gas carbonization, quenching and fine grinding process, therefore the bearing capacity of unitvolume is excessive.
5.Long life: Beneath the condition of appropriate type chosen (including choosing appropriate operation parameters)normal operation and maintenance, the life of main parts of speed reducer (except wearing parts) should not be less than 20000 hours. The putting on parts include lubricating bearing, oil and oil seal.
6.Low noise: because main elements of speed reducer are processed, assembled and tested critically,which means noise of speed reducer is definitely low;
7.Parallel axis -bevel wheel speed-down motor
cycloidal gear reducer
1. High quickness ratio and efficiency
Single stage transmission can reach to 1 1:87 of speed-straight down ratio and the efficiency is definitely a lot more than 90%. If use multi-speed get the speed-down ratio can be bigger.
2. Compact
Being adapted epicyclic tranny basic principle, the input and output shaft are at same axis centre, it is compact.
3. Smooth and steady run and low noise
The cycloidal pinwheel has more meshed teeth, the overlapping coefficient id big and the device part is stable, the vibration and noise is limited at the minimum content.
1. Large deceleration ratio
A higher deceleration ratio of 1/30-1/320 can be acquired.The structure is simple, but it can recognize high reduction ratio product.
2. Small gear clearance
The Get, which meshes with ordinary gears and has minimal backlash, is vital to the controller business.
3. High precision
Multiple teeth are engaged simultaneously, and there are several gears engaged with 180 degree symmetry. As a result, the effect of tooth pitch error and cumulative tooth pitch error on the rotation precision is relatively average, making the position precision and rotation precision reach a very high level.
4. Less parts, easy installation
The three basic elements achieve a high deceleration ratio, plus they are all on the same axis, so the kit is simple to install and simple to shape.
5. Small in size and light in weight
Compared with the prior gear device, the volume is 1/3, the pounds is 1/2, but can buy the same torque ability and reduction ratio, attaining small lightweight.
6 High torque capacity
Flexible wheel materials USES special steel with high fatigue strength.Not the same as ordinary transmission product, the quantity of teeth meshing makes up about relevant to 30% of the total amount of teeth. Furthermore, it is in call with the surface, so that the pressure borne by each equipment is reduced and substantial torque potential can be obtained.
7 High efficiency
The sliding of gear meshing parts is very small, which reduces the energy loss due to friction. Therefore, high lowering ratio may be accomplished while maintaining high proficiency, and miniaturization of driving motor can be realized.
8. Low noise
The apparatus meshing cycle swiftness is low, the transmission activity force balance, which means operation is quiet, and the vibration is very small.
◆Huge speed ratio and huge efficiency single-stage transmission can perform a deceleration ratio of just one 1:87, and the efficiency is more than 90%. If multi-stage transmission is used, the deceleration ratio will be larger.
◆Because planetary transmission theory is adopted, the suggestions shaft and end result shaft are on a single axis line, to ensure that the machine unit can get the smallest possible size.
◆The number of meshing teeth of cycloidal needle teeth with smooth running noise and low cycloidal noise is more, the overlap coefficient is greater, and the mechanism of balancing machine parts produces the vibration and voice limited to a minimum.
◆Reliable use and extended service life as the primary parts are constructed with substantial carbon chromium steel, huge strength is definitely obtained by quenching (HRC58-62), and rolling friction is used in some transmission contacts, therefore the service life is extended.
Cycloid reducer is going to be a cycloid needle teeth meshing planetary transmission principle drive models, is a great transmission has many advantages, versatile, and will be both negative and positive operation.
•Big ratio, and excessive efficiency Smooth operation,
• low noise The usage of reliable,
• long life can reach 50000 hours
• Main parts high-carbon the Ming-steel after quenching treatment (HRC58-62),
• operation and connection with rolling friction, basically no wear, durable.
• Compact structure,
• small size Because the utilization of a planetary transmission, the source shaft and the result shaft on a single axis, making the model to get the smallest possible size.
• Reasonable design, easy repair, and break down easily install,
• minimal number of parts and simple lubrication, cycloid reducer trusted by an individual.
(1)Size above PL/PF120(including)high torque products adopt integral double wall planet pinion precision, improve the output strength and carrier.
(2).Hoop clamp coupling have five connection ways well suited for different application environments.
(3).Size over PL/PF120(incorporating)precision and high strength integral inner gear casing, 
processed in one station,which get rid of the cumulative mistake and assembling error of split type.Remove casting process;adopt incredibly hot of forging process, that will decrease the blank material defects.
(4).The meshing equipment adopt shaving procedure after carburizing and quenching,which much easier to make gear surface area smooth and high precision,decrease the temperature rising caused by gear area gluing and friction.
This series worm-gear reducer was crafted after RV worm microreducer, that have a complete norm, wide speed for selection, and several mounting positions. Its overall performance and mounting dime nsions conform the same varieties of foreign.
The mixture of worm and gear has higher efficiency and wider speed range to single worm.
Designation of square shape, beautiful shape, radiate heat efficiently, low noise and compact structure.
Great sealing and adaptability.Its combo with T equipment reducer and MB/MBN variator may meet all sorts of speed requirement.