Flexible plastic gear racks in 0.8 Mod (32DP) pitch. These racks can provide an easy to install rotational drive of up to approx 270 degrees for instance on camera focus rings. They also provide an economical option where a big gear is required or a longer stretch (up to 2 metres) of linear movement is desired. These racks are appropriate for our 0.8 Mod and 32 DP pitch Spur Gears.
EVER-POWER share racks are created for high precision linear motion applications. You can expect a large collection of racks ranging from module 0.5 to 10 and lengths from 100 to 2000 mm.
Hardened Floor Racks (MRGF – MRGFD) : Gets the highest strength and precision in the EVER-POWER standard rack series. Bolt holes can be remachined as carburizing is usually applied just within the tooth region. J Series products are also available.
Hardened Surface Racks (KRGF-H – KRGFD-H) : Heat treated surface gears with high precision and strength has excellent cost-overall performance ratio. J Series items are also available.
Hardened Racks (KRF-H/KRFD-H) : This is a strong rack made of Chromoly steel, treated simply by carburizing. Has high-power, high wear resistance, and allows downsizing of SR racks. J Series items are also available.
Hardened Racks (SRF-H/SRFD-H) : Stable Hardened racks with high power, long life span are affordable. J Series items are also available.
Thermal Refined Ground Racks (KRG – KRGF – KRGD) : High strength and abrasion-resistant for precision linear motion.
Metal Racks w/ Machined Ends (SRAF – SRAFD – SRAFK) : This gear rack has the same tooth height and encounter width sizes, more compact and reasonably priced compared to SRF Racks
Steel Racks (SR) : Low cost, large choices of modules and amount of teeth. J Series products are also available.
Steel Racks w/ Machined Ends (SRF) : Low priced, large choices of modules and amount of the teeth. J Series items are also available.
Racks with Bolt Holes (SRFD – SRFK) : Low priced, large selections of modules and quantity of teeth. J Series items are also available.
Stainless Steel Racks (SUR•SURF•SURFD) : Ideal for food machinery because of SUS304 materials\’s rust-resistant quality.
Plastic-type Racks (DRF/DRFD/DRFK) : Plastic racks with little dimensional change, absorb lower water than MC Nylon racks. J Series products are also available.
Plastic-type material Racks (PR•PRF) : Produced form MC nylon, can be utilized without lubrication.
Brass Racks (BSR) : Small pitch racks manufactured from free-slicing brass, excellent workability and high rust resistance.
Steel Circular Racks (SRO – SROS) : Convenient in applications where the rack gets the reciprocal movement. S Type is simple to install.
Stainless Steel Round Racks (SURO) : Same dimensions as SRO racks, except in stainless. Use where rust-resistance is required.
Surface Helical Racks (KRHG – KRHGF – KRHGFD) : Excellent products with high precision and power, and low noise and abrasion characteristics.
Metal Helical Racks (SRH – SRHF – SRHFD) : Effective in reducing noise and vibration due to larger get in touch with ratio of helical gears.
Molded Versatile Racks (DR) : Found in applications because 
of its flexibility, where steel racks do no have this attribute. Pinions and components are also available.
Molded Flexible Rack Clamps (SRS) : Used to secure Molded Flexible Racks.
Molded Versatile Rack Pinions (SSDR) : Spur pinions utilized for molded versatile racks.
Flexible Rack Guideline Rails (ARL) : Guideline Rails for Molder Versatile Racks.
You can expect as standard an array of Racks in Metric and Imperial sizes. Spur Racks are available in Steel (En8) and up to 2 metres long. Stainless Steel and Delrin (Plastic-type) Racks are produced with Spur and Helical tooth forms, square and round sections up to 400mm long. Alternative materials are available on request. Moulded Hostaform Racks are available to offer an economical alternative where much less torque is required.
Variable stiffness can enhance the capacity for human-robot interacting. Based on the system of a versatile rack and equipment, a rotational joint actuator named vsaFGR is proposed to modify the joint stiffness. The flexible gear rack could be regarded as a mixture of a non-linear elastic component and a linear adjusting system, providing benefits of compactness. The joint stiffness is certainly in the number of 217-3527 N.m/rad, and it is inversely proportional to the 4th-order of the apparatus displacement, and nearly independent from the joint angular deflection, providing advantages of quick stiffness regulation in a brief displacement of 20 mm. The gear displacement with regards to the flexible equipment rack is perpendicular to the joint loading power, so the power required for stiffness regulating is really as low as 14.4 W, providing advantages of energy saving. The high compactness, great stiffness range and low power price of vsaFGR are proved by simulations and experiments.
Flexible plastic gear racks in 0.8 Mod (32DP) pitch. These racks can offer an easy to install rotational drive of up to approx 270 degrees for instance on camera focus rings. They also offer an economical remedy where a big gear is necessary or an extended stretch (up to 2 metres) of linear motion is preferred. These racks are compatible with our 0.8 Mod and 32 DP pitch Spur Gears.
EVER-POWER share racks are made for high precision linear movement applications. We offer a large collection of racks ranging from module 0.5 to 10 and lengths from 100 to 2000 mm.
Hardened Floor Racks (MRGF – MRGFD) : Gets the highest power and precision in the EVER-POWER regular rack series. Bolt holes can be remachined as carburizing is usually applied only within the tooth area. J Series products are also available.
Hardened Surface Racks (KRGF-H – KRGFD-H) : Heat treated ground gears with high precision and power has excellent cost-functionality ratio. J Series items are also available.
Hardened Racks (KRF-H/KRFD-H) : This is a strong rack made of Chromoly steel, treated by carburizing. Has high-power, high wear resistance, and allows downsizing of SR racks. J Series items are also available.
Hardened Racks (SRF-H/SRFD-H) : Stable Hardened racks with high strength, extended life span are reasonably priced. J Series products are also available.
Thermal Refined Ground Racks (KRG – KRGF – KRGD) : High strength and abrasion-resistant for precision linear motion.
Metal Racks w/ Machined Ends (SRAF – SRAFD – SRAFK) : This gear rack gets the same tooth height and face width sizes, smaller sized and reasonably priced compared to SRF Racks
Steel Racks (SR) : Low cost, large choices of modules and amount of tooth. J Series items are also available.
Steel Racks w/ Machined Ends (SRF) : Low priced, large selections of modules and amount of teeth. J Series products are also available.
Racks with Bolt Holes (SRFD – SRFK) : Low cost, large choices of modules and number of the teeth. J Series products are also available.
STAINLESS Racks (SUR•SURF•SURFD) : Ideal for food machinery because of SUS304 materials\’s rust-resistant quality.
Plastic Racks (DRF/DRFD/DRFK) : Plastic racks with small dimensional change, absorb lower water than MC Nylon racks. J Series items are also available.
Plastic-type material Racks (PR•PRF) : Made form MC nylon, can be used without lubrication.
Brass Racks (BSR) : Little pitch racks manufactured from free-trimming brass, excellent workability and high rust resistance.
Steel Circular Racks (SRO – SROS) : Convenient in applications where in fact the rack has the reciprocal movement. S Type is simple to install.
Stainless Steel Round Racks (SURO) : Same dimensions as SRO racks, except in stainless steel. Use where rust-resistance is required.
Ground Helical Racks (KRHG – KRHGF – KRHGFD) : Excellent products with high precision and strength, and low sound and abrasion characteristics.
Steel Helical Racks (SRH – SRHF – SRHFD) : Effective in reducing noise and vibration due to larger get in touch with ratio of helical gears.
Molded Flexible Racks (DR) : Used in applications due to its flexibility, where steel racks do no have this attribute. Pinions and components are also available.
Molded Versatile Rack Clamps (SRS) : Utilized to secure Molded Flexible Racks.
Molded Versatile Rack Pinions (SSDR) : Spur pinions utilized for molded flexible racks.
Flexible Rack Information Rails (ARL) : Instruction Rails for Molder Flexible Racks.
We offer as standard an array of Racks in Metric and Imperial sizes. Spur Racks are available in Steel (En8) or more to 2 metres long. Stainless Steel and Delrin (Plastic-type) Racks are produced with Spur and Helical tooth forms, square and circular sections up to 400mm in length. Alternative materials are available on demand. Moulded Hostaform Racks are available to offer an economical alternative where less torque is required.
Variable stiffness can enhance the capacity for human-robot interacting. Based on the system of a versatile rack and gear, a rotational joint actuator called vsaFGR is usually proposed to modify the joint stiffness. The versatile gear rack could be regarded as a combination of a non-linear elastic component and a linear adjusting mechanism, providing advantages of compactness. The joint stiffness is in the number of 217-3527 N.m/rad, in fact it is inversely proportional to the 4th-order of the gear displacement, and nearly independent from the joint angular deflection, providing advantages of quick stiffness regulation in a brief displacement of 20 mm. The apparatus displacement with regards to the flexible equipment rack is definitely perpendicular to the joint loading pressure, so the power necessary for stiffness regulating is as low as 14.4 W, providing advantages of energy saving. The high compactness, great stiffness range and low power price of vsaFGR are proved by simulations and experiments.