Designed to move personnel and cargo in a variety of commercial settings, Ever-Power’s rack and pinion elevator, also known as rack and pinion lift, set the global standard for safe, efficient vertical access. Equipped with a drive assembly on the car platform, gear rack for elevator elevator power is supplied by a motor driving a pinion equipment. Each pinion gear operates on a stationary rack linked to a supported tower, and rack and pinion elevator systems could be manufactured with different cab sizes, capacities and control choices. Elevators are also manufactured with an unbiased over-speed safety device, consisting of a governor-managed brake and separate pinion (operating on the same rack).
Proven to increase productivity and security for service owners and crew managers, Ever-Power rack and pinion systems provide a competitive advantage over traditional traction-style industrial elevators. Each unit can be set up on building and framework exteriors, allowing for expanded production space. In addition, there is no machine room required, no hoistway needed, no overhead loads necessary. Steel support sizes are decreased, and installation could be finished quickly and more cost effectively than typical elevators. Furthermore, each state-of-the-art elevator also allows for frequent inspections and a safe method of evacuation during emergency situations.
When determining the specs for your industrial elevator, make sure you consider the following benefits and advantages a rack-and-pinion drive elevator offers in comparison to a traction drive elevator. Geared traction elevators work through the use of gears to roll steel hoist ropes or cables over a drive shaft. This drive shaft being driven by a high-speed motor, usually mounted in a separate machine room, to hoist up the passenger car. Rack-and-Pinion elevators operate differently as there are no hoist ropes or cables. The drive motor is mounted on the best of the car and the drive gear, called a pinion, can be attached to the motor. This allowed for there to become a permanently mounted gear monitor, creating a no slip elevator system for use in harsh environments, like on an outdoor construction site.
The drive assembly is installed on the car platform and the power originates from a motor driving a pinion gear. The gears function separately on a stationary rack that’s linked to a support tower.

Metro Elevator may sell or lease a rack and pinion elevator to your specifications with an array of cab sizes, various capacities, and with different control options. Each elevator comes with an over-speed safety device, which includes a governor-operated brake and another pinion which operate on the same rack. Rack and pinion elevators and hoists were designed to meet a variety of needs. They can move personnel and cargo in various commercial settings and are frequently used on the surface of buildings. They certainly are a perfect remedy for short-term construction projects. Also referred to as rack and pinion lifts, Metro’s elevators meet or exceed all protection requirements and so are an efficient approach to vertical transport. They may be installed efficiently and are made to be strong and sturdy, however they are not permanent structures.
A rack and pinion elevator system having at least two spaced racks and an elevator cage therebetween which bears at least one drive electric motor in driving engagement with each rack respectively, carries a transmission device like a shaft which is connected to the elevator cage. At least two pinions, each engaging with a respective rack, are rigidly guaranteed to the transmitting means so that the pinions move along the racks together with the elevator cage to transfer driving forces via the transmission device from the less loaded to the more loaded aspect of the elevator cage thereby to considerably equalize the loads on the separate drive motors whatever the position of the center of gravity of the strain in the elevator cage.
Gear rack, when used in combination with spur gears, converts rotary movement into linear motion. Gear rack from Ever-Power Equipment is designed to operate with our share 14 1/2° and 20° PA spur gears.