This standard selection of Servo-Worm Reducers are ideal for use in applications that demand high performance, precise positioning and repeatability. These were specifically developed for use with state-of-the-art servo motor technology, providing restricted integration of the electric motor to the unit. Angular backlash of significantly less than 1 arc-minutes is provided standard.
They are available in four sizes (50 mm to 100 mm center distance) with input speeds up to 
5,000 rpm, reduction ratios from 4.75 to 52:1 and output torque capacities up to 885 lb.ft. A wide range of engine couplings and installation flanges are for sale to assembly to virtually all servo motors, and the hollow bore output can be used to mount output shafts, pinion shafts, or other drive elements.
Common applications for these reducers low backlash worm drive include precision rotary axis drives, traveling gantries & columns, material handling axis drives, zero-backlash axis drives and electronic line shafting. Industries offered include Material Handling, Automation, Aerospace, Machine Tool and Robotics.
helical-worm servo gearmotors possess a torque selection of 92 Nm to 520 Nm. As angular drives they are especially space-saving and reduce the expenditure for valuable installation space.
The helical-worm servo gearmotors are designed so that they guarantee you a low-noise system environment. Moreover, these gearmotors provide you excellent attenuation properties for the operation of your systems with low levels of vibration. This is certainly due to the longitudinal app of power on the insight shaft. This enables torque impulses to become prevented successfully and for optimum results with regards to running smoothness and sound reduction to be performed.
Both the equipment unit, and the synchronous servomotor are based on our modular program. This allows you to have fully individual configuration possibilities for each application. One matter is certain – Our servo gearmotors are actual specialists for very particular requirements.
Wormwheel gearboxes go by several names, including 90-degree gearboxes, right position gearboxes, swiftness reducers, worm equipment reducers and worm drive gearboxes. Gear decrease boxes include a gear arrangement in which a equipment in the type of a screw, also referred to as a worm, meshes with a worm gear. These gears are usually made from bronze and the worms are metal or stainless steel.
While worm gears are similar to a spur equipment, the worm gearboxes are considerably smaller than other equipment reduction boxes. A major benefit of worm gear reducers is usually that they create an output that is 90° from the input and can be used to transmit higher torque or reduce rotational speed. Most often, a worm gearbox provides right hand threads; to improve the path of the output, a left-hand thread worm gearbox is required.
At times a motor’s capability could be limited to the point where it needs gearing. As servo producers develop more powerful motors that can muscle mass applications through more difficult moves and produce higher torques and speeds, these motors require gearheads add up to the task.