The equipment boxes are made from stainless, except from the insight flanges which are constructed of anodized aluminum. Security class IP65 is regular – IP67 available as option – which is acheived utilizing a patented insight sealing and a patented result sealing system.
Standard backlash is just 5 respectively 7 arc-minute (1 resp. 2 phases), reduced backlash is just 3 / 5 arc-min (option) and finally micro backlash is one third1 / 3 arc-min (option).
This means that the planetary gearbox for servo motor actual backlash at a certain load is MUCH Low in an APEX gear box than in virtually any other planetary gear box out there.
Gearboxes provide torque multiplication, speed decrease, and inertia matching for motor-driven systems. Servo systems, particularly, require gearboxes that can supply not merely high torque with low added inertia, but also high precision and stiffness. One kind of gearbox meets all these requirements while providing relatively lengthy operating life with zero-maintenance requirements: the planetary gearbox.
A planetary gearbox includes multiple planetary gears that revolve around a central sunlight equipment while engaging with an internal gear and rotating by themselves axes. The continuous engagement of the planetary gears means the load can be shared by multiple tooth, allowing planetary styles to transmit high torque loads.
This load sharing among teeth also gives planetary gearboxes high torsional stiffness, making them well suited for processes that involve frequent start-stop motions or changes in rotational direction, which are normal characteristics of servo applications. Most servo applications additionally require very precise positioning, and planetary gearboxes were created and manufactured to possess low backlash, with as little as 1-2 arcmin in some cases.
Planetary gearboxes may use spur or helical gears. While spur gears can have higher torque ratings than helical gears, helical styles have smoother operation, less sound, and higher stiffness, making helical planetary gearboxes the favored gearbox for servo applications.
Whenever a gearbox is put into the drivetrain, the rotational swiftness delivered from the engine to the driven element is reduced by the quantity of the gear ratio, that may allow the system to make better use of the servo motor’s speed-torque characteristics. Planetary gearboxes are able to accept very high input speeds and offer speed reduced amount of up to 10:1 for standard designs, with high-speed designs providing gear ratios (and, therefore, quickness reduction) of 100:1 or higher.
Planetary gearboxes can be lubricated with either grease or oil, although a planetary gearbox for servo use (sometimes referred to as a “servo rated” or “servo” gearbox) is frequently lubricated with grease. In either case – grease or oil lubrication – planetary gearboxes tend to be lubricated for the life of the gearbox by the manufacturer, which eliminates maintenance for the finish user.
The most important advantage of utilizing a gearbox in a servo system is arguably its effect on the inertia of the strain. The strain inertia, which can be reflected to the motor, is decreased by the sq . of the apparatus ratio. So a good relatively small gear decrease can have a substantial effect on the inertia ratio.
The right angle planetary gearbox with output shaft combines the advantages of a compact right angle gearbox and those of a typical planetary gearbox.

With its versatile mounting options, our right angle gearboxes offer intelligent drive solutions with a compact machine concept. The result shaft gives correct angle planetary gearboxes the benefit of a proven and reliable component for the proper angle tranny of torque and swiftness.