Gear Packing containers For Rotary Cutter’s, Shredders, and Choppers
RC 30 Collection Gearbox, 40hp Rated, 1-3/8″ SB input, 1-1/2″ X twelve Spline Output. 1:one.forty seven Ratio Substitute your damaged rotary cutter gearbox with this substitute unit. Why rebuild when you can substitute at this sort of a lower cost? These gearboxes have been used by Worksaver, HawkLine, Global, WAC, Massive Bee, LMC, King Kutter, Midwest, Servis, Bush Hog, some Howse and numerous a lot more. Observe: Actual Gearbox may possibly have a rounded housing or sq. as proven, based on present availability, all inside parts are interchangeable and specifications for each packing containers are similar! This gearbox features a 1:1.forty seven Pace Up equipment ratio for use on 5′ and bigger diameter rotary cutters. Sector normal one-3/eight” clean diameter input shaft with one/two” shear bolt gap and retaining ring groove and one.57″ diameter 12 tapered spline output shaft enable fitment to most light-weight, standard and medium obligation rotary cutters. Each gearbox attributes high speed ball bearing models and warmth handled gears and shafts to make sure extended existence. Four bolt mounting matches market standards. Each gearbox includes blade carrier mounting nut and cotter pin. Gearboxes are shipped dry and demand 16 ounces of 80-90W gearlube or equivalent. Disclaimer: Any and all Authentic Gear Manufacturer’s (OEM) tradenames, logos, drawings, colors, descriptive details and portion numbers are used for areas identification reasons only, and DN Products, LLC (DN) is in no way implying that any distinct areas are OEM areas. More, any use of the OEM’s tradenames, emblems, drawings or element numbers by DN is developed only to help DN’s consumers, in getting the suitable DN element or component which will change the OEM’s component.
rotary cutter gearbox