1.A connecting website link of an O-ring Chain for general application is pre-coated with grease at the pins. Before connection, confirm the grease about the surfaces of pins, and should the quantity of grease is small, apply grease with bare hands. (If gloves are utilized, the grease is going to be absorbed from the gloves.)
Example: When the connecting website link (I) of an O-ring chain for general application is
shipped, O-rings are fitted in the roots in the pins. When the O-rings come loose as a consequence of vibration during transport, refit the O-rings in to the roots of your pins.
In this case, be sure you return the grease collected on the roots with the pins towards the central surfaces on the pins, far more at portion A than at portions B proven in the above illustration. (Portions A is worn as a consequence of sliding using the bushings.)
two.The chain might be most effortlessly linked over the teeth of a sprocket. Engage the back links at the two ends from the chain with the sprocket teeth and match connecting pins. If the sprocket might be moved, the chain may also be connected around the loosened side.
3. Connecting procedure
1.Confirm that O-rings are attached to your roots from the pins.
two.If the volume of grease applied over the connecting pins is tiny, coat the pins with grease at the central portions.
3.Insert the connecting pins in to the bushings from the inner backlinks at the two ends.
4.Confirm that the grease is utilized to your total face in the O-ring, and fit the O-ring onto the connecting pins.
5.Insert the connecting pins in to the connecting plate and when pressing the connecting plate, set up the spring clip. Confirm whether the head (the end without a split) of the spring clip is turned during the feeding course of the chain. (See the following illustration.)
six.You should definitely confirm that the spring clip is securely fitted in the clip grooves of your connecting pins.
This completes jointing in the connecting website link. Note that grease about the surfaces of connecting pins and O-rings might be removed all through installation function. In this instance, re-grease utilizing the grease within the surface of the base chain or the grease during the polyethylene bag through which the connecting hyperlink was contained.