We – EPG Team the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 different branches. For a lot more particulars: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
I.Quick Introduction
Plum blossom sort elastic shaft coupling is created up of semi-shaft coupling with the same protruding claw and elastic element. Employing the plum blossom elastic ingredient place in between the protruding claw and two half shaft coupling to realize the connection of two semiaxis devices.
II.Software
Adaptable coupling mainly employed for start usually,rotating,large-velocity,medium torque and high dependability in the office. This sort of as:mining and metallurgy,mine,petroleum,chemical,market,obese,transportation,gentle market,weaving,h2o pump,supporter,and so forth. Function environment -35~+800°C.
| TYPE | Nominal Torque | General Diameter | Hub diameter | Assembled duration | Factor ring Dia | Factor Ring Width | Parallel Misalignment | Mass |
| NM | A | B | F | E | KG | |||
| HRC70 | 31 | sixty nine | sixty | 25.five | 31 | 18.5 | .3 | 1 |
| HRC90 | 80 | 85 | 70 | thirty.5 | 32 | 22.five | .3 | one.seventeen |
| HRC110 | one hundred sixty | 112 | 100 | 45.5 | 45 | 29.five | .three | 5 |
| HRC130 | 315 | 130 | a hundred and five | fifty three.5 | 50 | 36.5 | .4 | 5.forty six |
| HRC150 | 600 | 150 | one hundred fifteen | sixty.5 | sixty two | 40.five | .4 | seven.eleven |
| HRC180 | 950 | 180 | one hundred twenty five | seventy three.five | seventy seven | 49.five | .4 | 16.65 |
| HRC230 | 2000 | 225 | 155 | eighty five.5 | ninety nine | fifty nine.5 | .5 | 26.05 |
| HRC280 | 3150 | 275 | 206 | one hundred and five.5 | 119 | 74.5 | .five | fifty.05 |
| Kind | Allowable Wrench Torque (N.m) | Max (rpm) | Max Bore (mm) | Out Dia (mm) | Whole Length (mm) | L1 (mm) | Excess weight (kg) |
| L-035 | .fifteen | 6000 | eight | sixteen.one | twenty.fifteen | 6.sixty eight | .02 |
| L-050 | .forty five | 4500 | 16 | 27.six | forty two.55 | fifteen.sixty | .14 |
| L-070 | .9 | 3600 | 20 | 34.3 | 49.92 | 19.30 | .twenty five |
| L-075 | 1.5 | 3600 | 26 | forty four.six | fifty two.88 | twenty.sixty | .forty five |
| L-090 | 2.four | 3000 | 28 | fifty three.6 | 53.22 | 20.70 | 50.66 |
| L-095 | 3 | 3000 | 28 | fifty three.6 | sixty two.36 | twenty five.twenty | .78 |
| L-a hundred | 7.5 | 3000 | 36 | sixty four.6 | 86.forty seven | 34.70 | 1.53 |
| L-110 | 15 | 2500 | 38 | eighty four.3 | 106.32 | forty three.10 | 3.3 |
| L-150 | 30 | 2500 | forty six | ninety five.three | 112.ninety five | forty four.sixty | four.forty eight |
| L-one hundred ninety | 45 | 2000 | 58 | a hundred and fifteen | 138.fifty | fifty six.00 | nine.fourteen |
| Kind | Max torque N.m |
Max pace r/min |
D | D 1 | d one | L | C | n-M | kg |
| FCL90 | four | 4000 | ninety | 35.five | eleven | 28 | three | 4-M8×50 | one.7 |
| FCL100 | ten | 4000 | a hundred | 40 | 11 | 35.five | 3 | 4-M10×56 | 2.3 |
| FCL112 | sixteen | 4000 | 112 | 45 | 13 | 40 | three | four-M10×56 | 2.8 |
| FCL125 | 25 | 4000 | a hundred twenty five | fifty | thirteen | forty five | three | four-M12×64 | 4. |
| FCL140 | 50 | 4000 | 140 | sixty three | 13 | fifty | 3 | six-M12×64 | 5.four |
| FCL160 | a hundred and ten | 4000 | 160 | eighty | fifteen | 56 | 3 | 8-M12×64 | 8. |
| FCL180 | 157 | 3500 | 180 | 90 | 15 | sixty three | 3 | eight-M12×64 | 10.5 |
| FCL200 | 245 | 3200 | two hundred | one hundred | 21 | 71 | four | 8-M20×85 | 16.two |
| FCL224 | 392 | 2850 | 224 | 112 | 21 | eighty | 4 | eight-M20×85 | 21.3 |
| FCL220 | 618 | 2550 | 250 | 125 | 25 | ninety | four | eight-M24×110 | 31.six |
| FCL280 | 980 | 2300 | 280 | one hundred forty | 34 | 100 | four | eight-M24×116 | 44. |
| FCL315 | 1568 | 2050 | 315 | one hundred sixty | 41 | 112 | 4 | ten-M24×116 | 57.7 |
| FCL355 | 2450 | 1800 | 355 | one hundred eighty | sixty | one hundred twenty five | 5 | eight-M30×50 | 89.five |
| FCL400 | 3920 | 1600 | 400 | 200 | sixty | one hundred twenty five | five | 10-M30×150 | 113 |
| FCL450 | 6174 | 1400 | 450 | 224 | 65 | a hundred and forty | 5 | twelve-M30×150 | one hundred forty five |
| FCL560 | 9800 | 1150 | 560 | 250 | 85 | 160 | 5 | fourteen-M30×150 | 229 |
| FCL630 | 15680 | one thousand | 630 | 280 | ninety five | one hundred eighty | five | eighteen-M30×150 | 296 |
Our Solutions
1. Convenient: 24th Several hours sales/Following-income Provider on-line or on the phone
two. Good quality Assurance: We will talk about with you and offer you the be EPT quality cozy to your market place
three. Quick supply: Time is funds, we guarantee we usually will provide the items faster than other people
4.According to customers’ drawing,custom-made technical specs are welcomed
five.Low MOQ,little orders can be accepted.
About us
Zhalaiteqi Xihu (We EPT Lake) Dis. Mechanical sea EPT part Co.,ltd is 1 of professional producer , developing and making rubber oil seals, hydraulic seals, mechanical seals,bearing,O-rings, PTFE gasket,and so forth. these merchandise are broadly utilised in automotive, weighty truck, agriculture machinery, construction machinery , Our business have powerful capacity in strategy R&D and wealthy knowledge in productions. We have 5 several years expertise.
We usually insi EPT on its foothold Products QUALI EPT IS Crucial TO AN Company and we will carry on to persi EPT on QUALI EPT Very first, CREDITABILI EPT FI EPT principle, focus on checking out and creating, consider our be EPT to proving 1st-course products and be EPT services to satisfy our customers’ requirements
Welcome to get in touch with us If your have any queries !
We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing facility in China with 5 various branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828 The use of original products manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference reasons only and for indicating product use and compatibility. Our business and the outlined substitution areas contained herein are not sponsored, accepted, or created by the OEM.
