Fan Motor, 1/8 hp 120V 2.2 Amp 3-Speed
General Description: New fan motor, taken off unused 18” or 24” China Surroundings Compressor diameter TPI fans. Made to operate an 18” or 24” enthusiast blade (blade NOT included).
This motor comes with a (detached) cord with grounded plug, motor capacitor and a 3-speed electric fan motor china control switch. All of the wiring in the middle of your electric motor, capacitor and quickness control change is still hooked up nevertheless the cord itself is generally detached as seen in the photos. (Discover “Control Notice” below for alter type.)
T (See “Program Notice” below for make use of in various other applications.)
Sizes: The engine body is 5” diameter and 3 ½” long (not including the shaft). The engine shaft is usually½” (0.500″) diameter x 2 ½” long with a collection screw clean. There are (4) threaded mounting lugs on leading of the motor, ½” lengthy x .16 dia. with washers and nuts. The studs may actually have got 4mm threads and to become on a 117mm (4.6”)diameter circle (3 ¼” measured from one stud to another).
Rate: The approximate motor speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Path of rotation (facing the shaft end of the electric motor) is Clockwise.
Control Take note: Motors will come with The 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we’ve demonstrated BOTH versions in the images). These two types of switches both control the engine in the same way (but you have a rotating knob and you have a pull-chain). In the event that you order several electric motor at the same time, we can do our best to supply your purchase with each one kind of control or the additional.
Application Note: Do NOT use this electric motor in a nonfan program. This is a totally enclosed fan electric engine and made to have constant ventilation over the motor casing for cooling. The housing isn’t vented and the electric motor will overheat and get into automated thermal overload if run in a nonfan program where there isn’t solid ventilation past the electric motor. (Caution Note: the electric motor will restart immediately when it cools cool off.) Using this electric motor for applications aside from 18 & 24″ TPI fans could also overload the electric motor and lead it to proceed into automatic thermal overload. (Your lover blade from another manufacturer may possess a steeper blade angle.)
Origin: This electric engine is produced in China.