Equipment Boxes For Rotary Cutter’s, Shredders, and Choppers
RC 30 Sequence Gearbox, 40hp Rated, 1-3/eight” SB enter, 1-1/two” X 12 Spline Output. 1:one.47 Ratio Replace your broken rotary cutter gearbox with this replacement unit. Why rebuild when you can change at this sort of a lower price? These gearboxes have been employed by Worksaver, HawkLine, Intercontinental, WAC, Massive Bee, LMC, King Kutter, Midwest, Servis, Bush Hog, some Howse and many more. Be aware: Actual Gearbox could have a rounded housing or sq. as demonstrated, based on current availability, all internal elements are interchangeable and specifications for both containers are similar! This gearbox features a 1:one.forty seven Speed Up gear ratio for use on 5′ and greater diameter rotary cutters. Industry normal 1-three/8″ clean diameter input shaft with 1/2″ shear bolt hole and retaining ring groove and 1.fifty seven” diameter 12 tapered spline output shaft permit fitment to most gentle, normal and medium responsibility rotary cutters. Each gearbox attributes large pace ball bearing models and heat treated gears and shafts to make certain extended lifestyle. Four bolt mounting matches sector expectations. Every single gearbox consists of blade carrier mounting nut and cotter pin. Gearboxes are shipped dry and require 16 ounces of 80-90W gearlube or equivalent. Disclaimer: Any and all Authentic Tools Manufacturer’s (OEM) tradenames, trademarks, drawings, colors, descriptive info and component numbers are used for elements identification purposes only, and DN Products, LLC (DN) is in no way implying that any certain components are OEM parts. More, any use of the OEM’s tradenames, emblems, drawings or part figures by DN is created only to help DN’s clients, in obtaining the proper DN element or ingredient which will replace the OEM’s element.
rotary cutter gearbox
Gearboxes operate to administer a transfer of pace and torque through their inner equipment rotation, assisting the general performance of your rotary cutter. This RW-710-6S gearbox operates at seventy five-90 HP. The housing is created from sturdy ductile iron and the enter shaft steps one-3/8 in., with 6 splines. It has a equipment ratio measuring one:1.46, and is designed for use with five ft., six ft., and seven ft. rotary cutters. A lot more size and much more HP mode remember to make contact with us for specifics.