one.A connecting link of an O-ring Chain for standard application is pre-coated with grease at the pins. Prior to connection, confirm the grease within the surfaces of pins, and if your volume of grease is little, apply grease with bare hands. (If gloves are utilized, the grease will likely be absorbed through the gloves.)
Instance: When the connecting hyperlink (I) of an O-ring chain for standard application is
shipped, O-rings are fitted at the roots in the pins. In case the O-rings come loose as a result of vibration during transport, refit the O-rings in to your roots of your pins.
In this instance, be sure to return the grease collected on the roots on the pins on the central surfaces from the pins, extra at portion A than at portions B proven during the over illustration. (Portions A is worn as a consequence of sliding together with the bushings.)
2.The chain is usually most very easily connected on the teeth of the sprocket. Engage the links at both ends of your chain with the sprocket teeth and fit connecting pins. If the sprocket can be moved, the chain may also be linked on the loosened side.
3. Connecting method
one.Verify that O-rings are connected on the roots with the pins.
2.If the volume of grease utilized around the connecting pins is small, coat the pins with grease on the central portions.
3.Insert the connecting pins in to the bushings on the inner backlinks at the two ends.
four.Confirm the grease is utilized on the total encounter in the O-ring, and match the O-ring onto the connecting pins.
5.Insert the connecting pins in to the connecting plate and when pressing the connecting plate, set up the spring clip. Confirm whether the head (the end without a split) from the spring clip is turned inside the feeding direction of your chain. (See the following illustration.)
six.You should definitely verify that the spring clip is securely fitted within the clip grooves from the connecting pins.
This completes jointing of the connecting hyperlink. Note that grease over the surfaces of connecting pins and O-rings is often removed during installation operate. In this case, re-grease utilizing the grease within the surface on the base chain or the grease within the polyethylene bag in which the connecting website link was contained.